Phone：+86 19056839023
Mobile：+86 19056839023
Email：helen@cnyongsen.com
Address：620 Huishui Road, Licang District, Qingdao
Standard Used |
Metric |
Imperial | |
Width | 300mm | 11.75” / 0.98’ | |
Length | 500mm | 19.4” / 1.62’ | |
Height | 50mm | 2.0” / 0.17’ | |
Area | 0.150 m ² | 1.59 ft ² | |
Void Storage Area | 87.6% - 6.8 mm ³ | 87.6% - .24 ft ³ | |
Material | ASTM D4104 | 100% Recycled Polypropylene | |
Biological & Chemical Resistance | Material is unaffected by mould, algae, soil-borne chemicals, bacteria & bitumen. | ||
Service Temperature | -30°C to 120°C | -22°F to 248°F | |
Unconfined Compressive Strength | ASTM D1621 | ±283.90 t/m² | ±405.3 psi |
Flow Rate per Unit Width | ASTM D4716 | >212 lt/min | >56.00 gal/min |
Compressive Strength Test Filled with Sand - Products must have a maximum deformation of <25%.
Filled with Sand | Area (mm ²) | Area (inches²) | Load (Kg) | Load (lbs) | Compressive Strength (t/m ²) | Compressive Strength (psi) |
54,554.73 | 84.56 | 231,332.1 | 510,000 | ±5,201.01 | ±7,395 |
Disclaimer: All information provided in this publication is correct to the best knowledge of the company and is given out in good faith. This
information is intended only as a general guide, no responsibility can be accepted for any errors, omissions, or incorrect assumption. As each ±project is unique, and as YsRain Tank Systems and its distributors and agents worldwide have no direct control over the methods employed by the user in specifying, installing, or supervising of its products hence YsRain Tank Systems and its distributors and agents worldwide accept no responsibility. Users should satisfy themselves as to the suitability of the product for their purpose. All product designs and specification are
subject to change without further notice.
Standard Used |
Metric |
Imperial | |
Width | 1200mm | 46.0Π | |
Length | 1000mm | 38.5Π | |
Height | 50mm | 2.0Π | |
Surface & Storage Area | 87.6% - 6.8 mm ³ | 87.6% - .24 ft ³ | |
Material | ASTM D4104 | 100% recycled polypropylene | |
Biological & Chemical Resistance | Unaffected by moulds and algae, soil-borne chemicals, bacteria and bitumen | ||
Service Temperature | -30°C to 120°C | -22°F to 248°F | |
Compressive Strength/ Ultimate Load |
ASTM D1621 |
±283.90 t/m2 |
±405.3 psi |
Flow Rate per unit width | ASTM D4716 | >848 Lt/min | >224.00 gals/min |
Compressive strength test filled with sand. Products must have a maximum deformation of <25%.
FILLED WITH SAND | Area (mm2) | Area (Inches2) | Load (Kg) | Load (LBS) | Compressive strength (t/m2) | Compressive Strength (PSI) |
54554.73 | 84.56 | 231332.1 | 510,000 | +-5201.01 | +-7395 |
Disclaimer: All information provided in this publication is correct to the best knowledge of the company and is given out in good faith. This information is intended only as a general guide, no responsibility can be
accepted for any errors, omissions, or incorrect assumption. As each ±project is unique, and as YsRain Tank Systems and its distributors and agents worldwide have no direct control over the methods employed by the
user in specifying, installing, or supervising of its products hence YsRain Tank Systems and its distributors and agents worldwide accept no responsibility. Users should satisfy themselves as to the suitability of the product for their purpose. All product designs and specification are subject to change without further notice.
